If the difference is less than a 14th of an inch, you should be fine, but anything between 14 and 12 inches is deemed out of square, and anything more than 12 inches is considered significantly out of square. The squareness of your window will determine the style of frame and mount you choose for your plantation shutters. You can learn more at Zebra shades Orlando
Measure for height on the inside of the drywall or at the spots where the plantation shutters will be installed and trim accordingly. It’s vital to consider if the drywall or trim narrows further back into the window gap. If it does, utilise the narrower of the two dimensions to determine where your shutters can be installed. Make sure you weigh the actual window opening and don’t subtract anything when measuring for interior mounting shutters. Precision is critical because the factory can produce the shutters slightly smaller than the specs you provide. “Round to the nearest 1/16 of a decimal place.” Round down to 3/16″ if the measurement is between 3/16″ and 1/4″ for example.
Metal chains are really weaker and less durable than plastic chains. Many people, on the other hand, prefer metal chains to power their roller shades. Finally, both are of excellent quality, and roller shade producers typically choose materials based on pricing rather than quality or efficiency, implying that they intend to produce high-quality roller blinds. Chain-operated roller shades provide a number of benefits, but we’ll focus on a few of them here. The first of these benefits is the ability to place shades more precisely. Consider how difficult it would be to adjust the height of a spring roller shade with precision. When it comes to spring colours, you must always pay attention to the season’s “suggestions” for placement. When you have chain roller shades, on the other hand, you can adjust the height of the shade to your preference.