It often seems like a good idea to save money by doing your own home renovations, but with something as vital as roofing installation, you need to make sure you have all of the necessary information. Otherwise, conserving money now could result in more money spent later on roofing repairs, so weigh your options. If you want something more sophisticated or complicated, such as slate tiles or metal roofing, you should invest the extra money to hire a professional, but for simpler solutions, following the appropriate recommendations can save you a lot of money on contractor fees. You can learn more at Home Share 5 Real Estate Analysis 8 Things To Know About A Slate Roof Installation
Roofing on a Roll
This method is not only the cheapest but also the easiest to instal yourself, so if you’re looking for a quick fix and are willing to replace it in roughly 8-10 years, this could be the best alternative.
- Purchase single-ply roll roofing and cut panels to size before laying them out flat.
- Lay the first panel vertically across the roof, allowing about 1/2″ of it to hang over the edge.
- Glue the pieces together with roofing cement, then nail them down with two nails every 12 inches.
Rolled roofing, on the other hand, is not only ineffective, but also unsightly, and is best used on flat roofs where you won’t see anything anyway. Try shingles, tiles, or shakes for something a touch more attractive but still doable as a DIY effort.
Cedar, concrete, clay, or asphalt are all options.
Asphalt shingles are another low-cost option that is quite straightforward to instal yourself; however, though they come in a variety of colours, they are plain and unappealing. Cedar shingles or shakes lend a more rustic look, while clay or concrete tiles provide a lot of beauty and charm. However, they are all pretty similar in terms of installation, with minor differences but fundamental commonalities.
How to Set Up
- If you’re working with concrete or clay, start by laying down a layer of plywood to assist hold the added weight.
- To absorb moisture, lay down underlayment in the form of felt paper.
- You’ll need horizontally anchored beams on which your shingles or tiles will be fastened.